La Trobe
Q3D_MCST_2DFGMB_FEM_R10.pdf (1.11 MB)
Download file

Size dependent bending analysis of two directional functionally graded microbeams via a quasi-3D theory and finite element method

Download (1.11 MB)
journal contribution
posted on 02.12.2020, 04:51 by A Karamanlı, Thuc VoThuc Vo
© 2018 Elsevier Ltd

This paper presents the flexural behaviour of two directional functionally graded (2D-FG) microbeams subjected to uniformly distributed load with various boundary conditions. A four-unknown shear and normal deformation theory or quasi-3D one is employed based on the modified couple stress theory, Ritz method and finite element formulation. The material properties are assumed to vary through the thickness and longitudinal axis and follow the power-law distribution. Firstly, the static deformations of conventional FG microbeams are investigated to verify the developed finite element code. For the convergence studies, a simply supported FG microbeam is considered by employing various number of elements in the problem domain, aspect ratios, material length scale parameters and gradient indexes. The verification of the developed code is established and then extensive studies are performed for various boundary conditions. Secondly, since there is no reported data regarding to the analysis of 2D-FG microbeams, verification studies are performed for 2D-FG beams with different aspect ratios and gradient indexes. The effects of the normal and shear deformations as well as and material length scale parameters on the flexural behaviour of the 2D-FG microbeams are investigated. Finally, some new results for deflections of conventional FG and 2D-FG microbeams for various boundary conditions are introduced for the first time and can be used as reference for future studies.

History

Publication Date

01/07/2018

Journal

Composites Part B: Engineering

Volume

144

Pagination

13p. (p. 171-183)

Publisher

Elsevier

ISSN

1359-8368

Rights Statement

The Author reserves all moral rights over the deposited text and must be credited if any re-use occurs. Documents deposited in OPAL are the Open Access versions of outputs published elsewhere. Changes resulting from the publishing process may therefore not be reflected in this document. The final published version may be obtained via the publisher’s DOI. Please note that additional copyright and access restrictions may apply to the published version.