1197773_Wells,D_2022.pdf (1.53 MB)
Observations of phase changes in monoolein during high viscous injection
journal contributionposted on 2022-05-12, 04:51 authored by Daniel WellsDaniel Wells, Peter Berntsen, Eugeniu BalaurEugeniu Balaur, Cameron KewishCameron Kewish, Patrick Adams, Sebastien Boutet, Hayden Broomhall, Carl Caleman, Andrew Christofferson, Charlotte E Conn, Caroline Dahlqvist, Leonie Flueckiger, Francisco Gian Roque, Tamar Greaves, Majid HejazianMajid Hejazian, Mark Hunter, Marjan Hadian JaziMarjan Hadian Jazi, H Olof Jonsson, Sachini Kadaoluwa Pathirannahalage, Richard Kirian, Alex Kozlov, Ruslan Kurta, Hugh Marman, Derek Mendez, Andrew Morgan, Keith NugentKeith Nugent, Dominik Oberthuer, Harry Quinney, Juliane ReinhardtJuliane Reinhardt, Sumitra Saha, Jonas Selberg, Raymond Sierra, Max Wiedorn, Brian AbbeyBrian Abbey, Martin Andrew, Connie DarmaninConnie Darmanin
Serial crystallography of membrane proteins often employs high-viscosity injectors (HVIs) to deliver micrometre-sized crystals to the X-ray beam. Typically, the carrier medium is a lipidic cubic phase (LCP) media, which can also be used to nucleate and grow the crystals. However, despite the fact that the LCP is widely used with HVIs, the potential impact of the injection process on the LCP structure has not been reported and hence is not yet well understood. The self-assembled structure of the LCP can be affected by pressure, dehydration and temperature changes, all of which occur during continuous flow injection. These changes to the LCP structure may in turn impact the results of X-ray diffraction measurements from membrane protein crystals. To investigate the influence of HVIs on the structure of the LCP we conducted a study of the phase changes in monoolein/water and monoolein/buffer mixtures during continuous flow injection, at both atmospheric pressure and under vacuum. The reservoir pressure in the HVI was tracked to determine if there is any correlation with the phase behaviour of the LCP. The results indicated that, even though the reservoir pressure underwent (at times) significant variation, this did not appear to correlate with observed phase changes in the sample stream or correspond to shifts in the LCP lattice parameter. During vacuum injection, there was a three-way coexistence of the gyroid cubic phase, diamond cubic phase and lamellar phase. During injection at atmospheric pressure, the coexistence of a cubic phase and lamellar phase in the monoolein/water mixtures was also observed. The degree to which the lamellar phase is formed was found to be strongly dependent on the co-flowing gas conditions used to stabilize the LCP stream. A combination of laboratory-based optical polarization microscopy and simulation studies was used to investigate these observations.
JournalJournal of Synchrotron Radiation
Rights Statement© The Authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/) which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made